 Information of Interest. .  | |
| Ripper Grab (Mounder) The Ripper Grab (Mounder) was designed for either building demolition work or land clearing work, (it can also be used for spot cultivating). The ripper tyne has a two pointed head so you can rip and use the reverse side to push and it gives the grab a point to clamp to. The ripper grab is fitted with a large hydraulic cylinder that will you to rip and load concrete footing, concrete slabs, stumps, debark logs, load logs, rip gravel, place rocks, rake, ethc. The plough is designed to plough for the spot cultivation. It can be fitted with a rake, or rake and grab combination but when fitted slows the process down. In my viewing I would use two excavators fitted with rakes and one fitted with Hyd. Quick hitch rake and plough. This combination would give maximum productivity for a small team. One Excavator will, Rake 1.8 to 2 hectares per 10 Hr Shift. Plough 5 to 6 hectares per 10 Hr Shift. Ripper Grab 1.5 hectares per 10 Hr Shift
| |
| |
|
| |
 |
A.M. Engineering. International phone + 418 140 330, Fax +61 3 6423 6417 |